VMC1690 Vertical Machining Center best seller

Inquire Now Next Product

Features

This VMC is suitable for mechanical processing and mold making .

And it can asapt to the processing requirement from rough machining to finish machining .

It can also finish many working procedures like milling ,drilling ,tapping ,boring ,etc.

1.The fuselage and main components are high strength cast iron, microstructure stability, ensure the stability of machine tool for long-term use.

2.The column at the bottom of A type bridge type structure, combined with the big box base, greatly reduce the vibration of machine on heavy cutting

3.The pre tension precision ball screw drive

4.The high speed, high precision, high rigidity spindle unit

5.The design of oil-water separation

6.The intermittent automatic lubrication

7.Automatic scraping knife system

Application

The vertical machining center can be applied to many fields such as mechanical processing and mould manufacturing, can adapt from roughing to finishing processing requirements, has the characteristics of high precision, high efficiency, is widely used in aerospace, military industry, mould, automobile, internal combustion engines, textile machinery, chemical machinery processing, oil, electronics and other industries.

Product Main Technical Parameters

Vertical Machining Center Features:

High quality resin sand

Taiwan spindle

Taiwan pressure cylinder

Automatic lubrication system

Chip conveyor at optional

Vertical Machining Center Application:

This VMC is suitable for mechanical processing and mold making .And it can asapt to the processing requirement from rough machining to finish machining .

It can also finish many working procedures like milling ,drilling ,tapping ,boring ,etc.

Vertical Machining Center Main Technical Parameters:

Specifications	Units	VMC1690
Table size	mm	1800x900
X axis travel	mm	1600
Y axis travel	mm	900
Z axis travel	mm	700
Max. worktable load	kg	1500
T slot(number-width-pitch)		5-22x165
Max. spindle speed	rpm	6000(Optional:8000)
Spindle taper	mm	BT50
Main motor power	kw	18.5/22
X/Y/Z rapid traverse speed	m/min	15/15/12
Cutting feed speed	mm/min	1-5000
Guide rail type		Linear rail
Distance from spindle axis to column surface	mm	950
Distance between spindle nose and worktable surface	mm	170-800
Positioning accuracy	mm	±0.01
Repeat positioning accuracy	mm	±0.0075
Tool magazine		Arm 24
Max. tool diameter	mm	φ112 (Adjacent)/ φ200(Apart)
Max.tool weight	kg	18
Machine weight	kg	14000
Overall dimension	mm	4500x3350x3200